TDS Peak Shaver

Optimized TDS Discharge Management

Reduce the total dissolved solids (TDS) in your wastewater discharge and stay in compliance, while only treating as much as you need to. Saltworks can help you to take full advantage of your TDS or specific ion discharge allowance, while minimizing treatment required and residual waste generated. 

peak-shaver-icon

PEAK SHAVER

SOLUTION

process-icon

PROCESS

OPTIMIZATION

REDUCE-COST-icon

LOWER CAPITAL &

OPERATION COSTS

customization-icon

CUSTOM

SOLUTIONS

Don’t Treat the Full Flow

To maintain TDS compliance, you may not need to treat the full flow, to the full extent. This allows ‘peak shaving’ opportunities, i.e. lowering the TDS by the optimal amount so that you remain in compliance, while still taking full advantage of your discharge limit.

 

Peak shaving requires sound process engineering and control, as well as high recovery systems to minimize TDS waste shaved from your peaks. If your project is reaching or exceeding your TDS discharge limit, Saltworks can help.

TDS PS graph 2

TDS Peak Shaving Example

Your process may be permitted to discharge 3,000 mg/L TDS, but you may see discharges approaching 4,500 mg/L. To resolve this, you don’t need to fully treat the entire flow. You only need to treat and manage the waste generated from the difference (i.e. 4,500 – 3,000 = 1,500 mg/L). We have options and solutions for you:

  • Identify the primary source of the TDS at its highest concentration, and target treatment at that point
  • Treat a portion of the flow, and re-blend to meet the final discharge requirement 
  • Minimize the brine generated with our high recovery membrane and thermal systems such as XtremeRO and SaltMaker AirBreather  
  • If your TDS load changes over a 24 hour basis (e.g. from over during the day, to under during the night, there may be a novel and low cost means to manage that brine waste.

Peak Shaving: Ask Us How

We can help you work through a TDS Peak Shaving analysis. Together we can strategize to lower your treatment costs, while also producing less residuals such as concentrated brine or solid salt. Contact us with your wastewater analysis, treatment goals, and flow rates.

 

If your TDS discharge fluctuates, be sure to let us know. We may be able to save you money and waste generated through sound process control.

Enhanced Oil Recovery

TDS Peak Shaver Related Products

XtremeRO/NF Brine 

Concentrator

Xtreme Reverse Osmosis device Saltworks Technologies

Next-generation water-maker and brine-concentrator based on reverse osmosis that achieves extreme freshwater recoveries, enabling cost-effective brine management and treatment of challenging organic-laden waters including oil & gas produced waters.

 

Learn More …

BrineRefine Chemical Softening System

Chemical Softening System called Brine Refine

Smart, compact, modular chemical softening system that reduces costs with precision dosing and built-in solids management. Improves recovery and minimizes fouling risk with intelligent controls that communicate with downstream assets, like RO or evaporators.

Learn More …

ScaleSense

Real-Time Sensor

scalesense

An automated, real-time sensor for saline waters that measures calcium (Ca2+), barium (Ba2+), sulfate (SO42-) ions and silica (SiO2). ScaleSense is robust and corrosion-resistant and functions accurately and precisely, even at extremely high-TDS.

 

Learn More …

 

SaltMaker

AirBreather

The first evaporator-crystallizer with no atmospheric contact, important for water with volatile organics. Choose between no liquid water return or clean water that is safe for discharge.

 

 

 

 

Learn More …

TDS Peak Shaver Related Resources

IonSelect

Learn More Request More Information Targeting specific ions for removal can be the most cost-efficient way to treat a wastewater flow. Saltworks has treatment and sensing solutions available to treat

Read More »

Get Your Project Assessment

Get More Information on TDS Peak Shaver Solutions & Products